Login
Cart 0

Archives: Customer Service

The rotisserie circuit has a 6 amp circuit breaker to protect the components in the event that the shelves accidentally dump or something causes the racks to jam. The 6 amp breaker is designed to stop the rotisserie preventing damage to the components. If the rotisserie stops turning, check the shelves and rack hangers to... Read more »

SSJ Series – Rotisserie Will Not Turn

Category:

The rotisserie circuit has a 6 amp circuit breaker to protect the components in the event that the shelves accidentally dump or something causes the racks to jam. The 6 amp breaker is designed to stop the rotisserie preventing damage to the components. If the rotisserie stops turning, check the shelves and rack hangers to... Read more »

EL Series – Rotisserie Will Not Turn

Category:

Rotisserie Will Not Turn If the rotisserie stops turning, the 6-amp rotisserie breaker may need to be reset. This breaker is located in the side compartment, right behind the switches and gauges, on the end loader models. On the side loader models it is inside the compartment behind the switches and gauges, near the drive... Read more »

Rotisserie Will Not Turn

Category:

After the smoker has heated for about an hour, if the Thermometer & Thermostat DO NOT agree… Follow This Procedure: After removing knob, locate the screw inside the shaft. If the thermometer reads lower than the thermostat, turn slotted screw counter clockwise, no more than 1/8 turn at a time. If the thermometer reads higher... Read more »

How to Calibrate the Thermostat

Category:

There are a few different reasons that can cause the gas burner to not light. Following these steps may diagnose the problem. During normal operation with the burner operating correctly, there are a few sounds that can help diagnose certain problems. Normally, when the thermostat is turned up, the burner blower will begin blowing air... Read more »

CTO Series – Burner Will Not Light

Category: